25% off on first order withAPEX25
Minecraft
Posted on Nov 17, 2026

Gravestone Mod: Keep Your Items After Death on a Server

Losing a full inventory to lava or a five minute despawn timer can quickly drain the fun out of a survival Minecraft server. While enabling keep inventory removes the risk of dying altogether, the Gravestone mod strikes a balance between th...
Gravestone Mod: Keep Your Items After Death on a Server

Table of Contents

Share on
Read Progress

Losing a full inventory to lava or a five minute despawn timer can quickly drain the fun out of a survival Minecraft server. While enabling keep inventory removes the risk of dying altogether, the Gravestone mod strikes a balance between the two. When a player dies, their items are safely stored inside a grave block at the death location. Players will get an obituary item listing the coordinates so they just have to make the trip back to reclaim their gear. In this Apex Hosting guide, we’ll show you how to install and use the Gravestone mod in Minecraft.

What the Gravestone Mod Does

A creeper blows up behind you in a deep cave, and a full kit of enchanted gear is gone. Some servers shrug that off. Others lose players over it. The Gravestone mod gives you a middle path. Death still costs a trip back, but your items wait for you where you died.

The developer, henkelmax, published the Gravestone Mod on Modrinth and it lists more than 12 million downloads! It has to be installed on the server and on every player’s client, with the same version on both sides.

Here is how it plays: When a player dies, the mod places a grave at their position. Breaking the grave returns the items, and they go back into their original slots. The player also gets an obituary item that lists the player’s name, the dimension, the date and the coordinates of the death. Right-click a grave to see the owner’s name and the date of death.
 

Gravestone Mod or Keep Inventory?

The two do not combine. The Gravestone mod places no grave and gives no obituary while the keepInventory gamerule is on. The mod’s death handler checks the gamerule and skips the grave. To use graves, turn keepInventory off.

keepInventory Gravestone Mod
What happens on death Items stay in the player’s inventory Items move into a grave at the death spot
Cost of dying None A trip back to the grave
Experience Kept Not described on the mod page
Setup One command, no mods Mod on the server and on every client

 
Without either one, a player’s items drop where they died and decay after five minutes. A grave holds the items in a block instead, so there is no five-minute clock on dropped items.

Switching is quick. Run /gamerule keepInventory false as an operator, and run /gamerule keepInventory with no value to check the current setting. On Minecraft 1.21.11 and newer, the rule name is minecraft:keep_inventory. The keep inventory guide covers the command in full, including operator setup.
 

How to Install the Gravestone Mod on Your Server

The Gravestone mod has Forge and NeoForge builds only. There is no Fabric version. The newest Forge build is for Minecraft 1.20.1, and NeoForge builds cover newer Minecraft versions. This guide gives panel steps for Forge 1.20.1 only. The mod has no required dependencies on 1.20.1, and Jade is an optional extra.
 

Set the Server to Forge 1.20.1

  1. Head towards your Apex server panel, then find the “Game File” area below.
  2. Click the selected option and type “Forge” in the search bar.
  3. Choose the Forge 1.20.1 version and confirm the prompts.
  4. On the final confirmation, click “Restart Now“.

 

Install with Modbox

Modbox is the built-in mod browser in the Apex server panel, with direct CurseForge integration.

  1. Log in to your Apex Hosting account and open your Minecraft server panel.
  2. On the left side, select “Server Configuration > Modbox“.
  3. Search for Gravestone and open its mod page.
  4. Select the recommended version for your server, then click “Install“.

 
Check that the mod page lists henkelmax as the author before you install. Modbox automatically matches mods to your server’s installed version, but it does not install dependencies automatically. Gravestone needs none on 1.20.1, so nothing else has to go in first. The full Modbox guide covers Modbox in more detail.
 

Upload with FTP

  1. Download the Forge 1.20.1 file from the GraveStone Mod page on CurseForge and save the .jar file.
  2. Head towards your Apex server panel and click the “FTP File Access” button.
  3. Enter your “Password” in the text box, then press “Login“.
  4. Locate and click the mods directory.
  5. Drag and drop the .jar file into this folder, then wait for it to reach 100%.
  6. Return to the main panel and restart the server.

 
The guide to adding mods explains the same upload route for any mod.
 

Client Installation

Each player needs a Forge 1.20.1 profile, and the same Gravestone file as the server is the safe choice. Forge 1.20.1 on the server means Forge 1.20.1 in every launcher. Start with the Forge client install guide if a player hasn’t set it up yet.

  1. Open your Minecraft launcher and click “Installations” near the top.
  2. Locate the Forge 1.20.1 profile and click its “Folder” icon.
  3. Open the mods directory. If one doesn’t exist, create it first.
  4. Drag and drop the Gravestone file into the mods folder.
  5. Return to the launcher and click “Play” on the Forge profile.

 

Gravestone Settings for Server Admins

The mod has nine server options, stored in gravestone-server.toml in the serverconfig folder inside your world folder. The defaults below come from the 1.20.1 source code, and they work for most servers without a change. To edit one, open the file through FTP File Access, double-click it, change the value, and press Ctrl+S (Cmd+S on Mac) to save. A restart after an edit is the safe way to make sure it applies.

Option Default What It Does
enable_obituary true Gives the player an obituary item on death
remove_obituary false Removes the obituary from the player’s inventory when the grave is broken
only_owners_can_break false Lets only the grave’s owner and operators break a grave
spawn_ghost false Spawns a ghost of the dead player when the grave is broken
friendly_ghost true Makes the ghost defend the player instead of attacking
sneak_pickup false Returns the items when the player sneaks on the grave
break_pickup true Sorts the items back into their original slots when the grave is broken
strict_placement false Lets a grave replace other blocks when there is no free space above
replaceable_blocks #gravestone:grave_replaceable Sets which blocks a grave can replace

 
The setting most admins change is only_owners_can_break. With the default, any player can break any grave. Set it to true, and only the owner and operators can break it.

Leave strict_placement off. The source code calls it not recommended and subject to change, and it can cause trouble with other mods. The default replaceable_blocks tag covers plants, snow, vines, fire, water and lava.
 

Restore a Player’s Items with /restore

An operator can give a player’s items back after a death, even if the grave is gone. The command is /restore <player> <death_id> <replace|add>, and /restoreinventory works as an alias. It needs permission level 2, so operators can run it.

The death_id is a unique ID for each death. Open the player’s obituary with advanced tooltips on (F3 + H) to read it. An operator can also sneak and right-click the obituary to get a ready-made restore command. The server log lists the ID too when a grave can’t be placed.

The last word decides what happens to the inventory. With add, the items go on top of what the player already carries. With replace, the inventory is cleared and filled with the items the player had just before dying.
 

Gravestone or Corpse?

Corpse is another mod by henkelmax with the same goal and a different design.

Gravestone Mod Corpse Mod
Where items wait In a grave block at the death spot In a corpse that wears the player’s skin
Getting items back Break the grave Right-click the corpse
Admin tools Obituary item and /restore Death history screen (U key) and /deathhistory
Loaders and sides Forge and NeoForge, server and client Forge and NeoForge, server and client

The Corpse page on Modrinth says a corpse can’t fall into the void or burn in lava. After one hour, it turns into a skeleton, which doesn’t change how it works. Pick Gravestone for a marker in the world and a restore command. Pick Corpse for the death history screen. This guide only covers Gravestone, but the Modbox and FTP steps follow the same pattern for any Forge mod.
 

Gravestone Mod FAQ

Is There a Fabric Version of the Gravestone Mod?

No. The mod is built for Forge and NeoForge only. On a Fabric server, you need a different mod for death handling.
 

Do Players Need the Gravestone Mod Installed?

Yes. The mod is required on the client and on the server, and the same version on both is the safe choice.
 

Can I Use Gravestone with Keep Inventory On?

No. The mod places no grave and gives no obituary while the keepInventory gamerule is on. Run /gamerule keepInventory false to turn graves back on.
 

Where Does the Grave Go If a Player Dies Inside a Block?

The grave goes to the next empty space above the death spot. If there is no free block above, or the player died above the build limit, the items drop as usual. A player who falls into the void gets a grave at the lowest point where blocks can be placed.