25% off on first order withAPEX25
Minecraft
Posted on Nov 18, 2026

V Rising Console Commands: Full Admin List and How to Use

A griefer is tearing through your server, or a raid went sideways and you need the exact command to fix it without a restart. V Rising console commands handle both, from kicking a player to jumping straight to a waygate. The admin commands ...
V Rising Console Commands: Full Admin List and How to Use

Table of Contents

Share on
Read Progress

A griefer is tearing through your server, or a raid went sideways and you need the exact command to fix it without a restart. V Rising console commands handle both, from kicking a player to jumping straight to a waygate. The admin commands only run once your account has admin rights on the server. In this Apex Hosting guide, we’ll show you the setup and list all the various commands to get you started.
 

How to Enable Admin Commands on Your V Rising Server

Admin rights on a V Rising server come from your Steam account. You add your SteamID64 to the Admin List in the Apex panel, restart the server, then run one command in game. Our guide on how to set admins on a V Rising server shows every step. Here is the short version:

  1. Look up your SteamID64 on a tool such as SteamID IO and copy the value.
  2. Head towards your Apex server panel and open the Customizations tab.
  3. Find the Admin List option and paste your SteamID64 into the field. For several admins, separate the IDs with commas.
  4. Return to the main panel and click Restart to apply the change.
  5. Join the server, then open Options and go to General.
  6. Make sure Console Enabled is on, leave the menu, and press ~ to open the console.
  7. Type adminauth in the console.

 
A confirmation message appears in chat once it works. If it doesn’t, the Admin List value is the usual cause, so double-check the ID and restart the server again.
 

Full List of V Rising Console Commands

The 75 commands below sit in seven tables, grouped by what they do. The first five tables hold the admin and testing commands, so run adminauth before you try any of them. The last two tables cover clan, character, and client commands.

Arguments in angle brackets are values you supply, and arguments in square brackets are optional. Where our sources give no argument syntax, the table shows the command alone.
 

Admin Access and Player Management

Start here for bans, mutes, and kicks. Run Banned before UnBan, because the unban command needs the list that Banned prints.

Command Arguments What It Does
AdminAuth Gives you admin rights once your SteamID64 is in the Admin List
AdminDeAuth Removes your own admin rights
Kick <CharacterName> Kicks a player from the server
BanUser <SteamID> Bans the account with that Steam ID
BanCharacter <CharacterName> Bans the account playing that character
BanUserTemp <SteamID> <number> <time unit> Bans an account for a set time; units include Minutes, Hours, Weeks, Months, and Years
BanCharacterTemp <CharacterName> <number> <time unit> Bans the account playing that character for a set time
Banned Lists every banned player
UnBan <UserIndex> Unbans a player from the list that Banned shows
SetPlayerMuted <Voice/Chat/Both> <CharacterName> <0/1> Mutes (1) or unmutes (0) a player’s voice chat, text chat, or both
SetPlayerMutedById <Voice/Chat/Both> <SteamID> <0/1> Does the same, using the Steam ID instead of the character name
ListUsers true/false Lists users active on the server; true includes all users, not only online ones
PlayerInfo Prints information about one player
RenamePlayer Renames a player
AdminOnlyDebugEvents true/false Sets whether debug events are limited to admins

 

Items and Gear

These commands hand out items, blood potions, jewels, and weapons. Treat them as testing tools, and think twice before using them on a live community server.

Command Arguments What It Does
give <item> <quantity> Gives an item to your character; the console completes the item name as you type
giveset <set> Gives your character a set of equipment
GenerateBloodPotion <BloodType_1> <Quality_1> [<BloodType_2> <Quality_2> <Tier>] Gives a blood potion; quality runs from 1 to 100, and the extra arguments make a mixed potion with a tier from 1 to 3
CreateJewel <ability> <tier> <spellmod1> <power1> <spellmod2> <power2> <spellmod3> <power3> Creates a custom jewel for an ability
GenerateJewel Generates a random jewel for an ability
GenerateJewelAtUnitLevel [<level>] Generates a random jewel at a specific unit level
GenerateJewelVariants Generates every jewel variant for an ability
CreateLegendaryWeapon <weapon> <infused type> <stat1> <power1> <stat2> <power2> <stat3> <power3> Creates a legendary weapon with a chosen infused element and stats
GenerateLegendaryWeapon Generates a legendary weapon
givecombatpresetandallunlocks Gives a preset of jewels, items, and spells, and gives access to all VBlood content
ChangeDurability <amount> <type> Changes the durability of your equipped items; it can’t repair broken items you aren’t wearing

 
Two examples show the pattern. giveset Official_Materials_T07 gives a Tier 7 material kit. GenerateBloodPotion BloodType_Draculin 100 BloodType_Warrior 100 3 makes a mixed potion. Draculin is the main blood and Warrior the secondary, both at quality 100, with the tier 3 trait included.

 

Teleport and Gather Commands

Teleports are easy to mix up under pressure. TeleportToPlayer moves you to someone, while TeleportPlayerToMe moves them to you.

Command Arguments What It Does
Teleport <who> <where> <WorldPosX> <WorldPosY> Teleports a player or unit somewhere else
TeleportToPlayer <user> Teleports you to that player’s location
TeleportPlayerToMe <user> Teleports a player to your location
TeleportPlayerToMousePosition <user> Teleports a player to your mouse cursor position
PlayerTeleport Teleports your character to your mouse cursor position
TeleportToChunk <chunk> Teleports you to the center of a chunk, for example TeleportToChunk 11,10
TeleportToChunkWaypoint <chunk> Teleports you to a waygate in that chunk with no resource cost, for example TeleportToChunkWaypoint 6,1
TeleportToMapMarker Teleports you to your marker on the map
TeleportToNearestUnitOfType Teleports you to the nearest unit of a given type
TeleportToNether Teleports you to the instanced tutorial area where players first join the world
GatherAllAllies Teleports all allies to your mouse cursor position
GatherAllAlliesExceptMe Teleports all allies except you to your mouse cursor position
GatherAllNonAllies Teleports all non-allies to your mouse cursor position
GatherAllPlayers Teleports all players to your mouse cursor position
GatherAllPlayersExceptMe Teleports all players except you to your mouse cursor position

 

World, Time, and Server Commands

These change the clock, force a save, and let you watch the server without being seen.

Command Arguments What It Does
AddTime <hours> Moves game time forward by up to 12 hours, which also affects respawn timers; time can’t move backward
TriggerAutoSaveOnServer Triggers an auto-save on the server
ServerTime Shows server time information
ToggleInvulnerable true/false Turns damage invulnerability on or off for yourself
ToggleObserve true/false Turns invisible observation mode on or off
ChangeHealthOfClosestToMouse <HPAmount> Changes the health of the unit or object closest to your cursor; negative values damage it and positive values heal it

 

Castle, Events, and Progress Commands

Some of these change the shape of the world, so test one on a quiet server before you rely on it during a live event.

Command Arguments What It Does
CastleHeartEvent Runs a castle heart event
DecayUserCastles Puts the target user’s castles into decay
ForceJoinClan Force-joins the clan of another player, if that player is in one
Duel_Instantiate Starts a duel between two players
CompleteCurrentJournalQuest Completes a player’s current journal quest
CompleteJournalQuests Completes a number of a player’s journal quests
WarEvent_Start Starts a war event of a specific type
WarEvent_StartInChunk Starts a war event in a region
WarEvent_SetRemainingTime Sets the remaining time of a war event
WarEvent_CloseGate Closes a gate at given coordinates
WarEvent_ClosePortal Closes a portal at given coordinates

 

Clan and Character Commands

Players use these to manage clans. Kill is the odd one out: it kills your own character.

Command Arguments What It Does
ClanInvite Invites a character to your clan
ClanAccept Accepts a clan invite
ClanDecline Declines a clan invite
ClanLeave Leaves your clan
Kill Kills your own character

 

Client Console and Display Commands

Any player can use these, with or without admin rights. They matter most for building shortcuts and tidying the console.

Command Arguments What It Does
List Lists all available commands and categories
Console.Clear Clears all text from the console
Console.Alias Creates a custom alias for a console command
Console.Bind <key> <command> Binds a keyboard key to a console command
Console.Unbind Deletes a key binding
Console.MultiCommand <command; command> Runs several commands at once, separated by a semicolon
Connect Connects to a server
Disconnect Disconnects you from the server
Reconnect Reconnects you to the server
HideHud Hides the HUD
ShowHud Shows the HUD
SetResolution <width> <height> Sets your client resolution

 

Why Your Commands Are Not Working

These five checks cover the usual causes. Work through them in order before digging deeper.

  • The console is off. Open Options, go to General, and turn on Console Enabled, then press ~.
  • You haven’t authenticated. Run adminauth again and wait for the confirmation message in chat.
  • The Admin List is wrong. A bad SteamID64, or a change you didn’t apply with a restart, stops the whole setup.
  • Disable Debug Events is ticked. Apex’s customization settings guide says this setting disables access to the debug event commands in the game console, and it recommends leaving the box unchecked if you are unsure. That guide doesn’t name which commands count as debug events. If a testing command such as give does nothing after adminauth, check this box. Stop the server, untick the box in the Customizations tab, then start the server again.
  • The arguments are off. Compare what you typed with the tables above, because a missing value or a wrong order is easy to miss.

 

V Rising Commands FAQ

 

How Do I Temporarily Ban a Player?

Use BanUserTemp with the player’s Steam ID, a number, and a time unit, for example BanUserTemp <SteamID> 12 Hours. If you only know the character name, use BanCharacterTemp with the name instead.
 

How Do I Unban a Player?

Run Banned first to print the list of banned players. Then run UnBan with the user index of the player you want back. UnBan works from that list, so Banned has to come first.

If you banned someone through the Ban List in the Customizations tab, stop the server, remove their SteamID64 from that list, and start the server again.
 

How Do I Remove Admin Rights?

Type admindeauth in the console to give up your own admin rights. To take rights from another player, remove their SteamID64 from the Admin List in the Customizations tab and restart the server.
 

Next Steps for Your V Rising Server

Admin commands are one part of running a community. The same Customizations tab sets a reset schedule for your world, and our guide on configuring V Rising server wipes walks through it. And if you’re still building the server itself, see our V Rising server hosting plans.